Auto Code Readers

Vauxhall-Opel Auto Transmission - Auto Repair Codes

Scan Tool for Codes and Live Data for your Vauxhall-Opel Transmission from $149.95

The information below may apply to Vauxhall-Opel Carlton, Corsa, Omega, Sintra and many other models

Step 5
Vauxhall Trans Code Reading
Connector Diagram
Connector Location
Auto Repair Manual - How to read codes (No Special Tools Needed)
1 Drive vehicle until it reaches operating temperature.
2 Stop vehicle, place in park or neutral and turn ignition OFF.
3 Connect the terminals using your own wire link, (Click here for details) , as shown in the diagram to your left and turn ignition ON.
4 Turn ignition ON. Transmission light should now flash codes.
5 Read codes as described in the Code Format Description below.
6 Press the continue button to enter the code numbers and get the code description(s).
Code Format Diagram
Code Format Description
Each code is made up of two series of flashes.
The first series indicates the 'tens' digit.
The second series indicates the 'ones' digit.
A long pause separates each code.
A shorter pause separates the 'tens' and 'ones'.
Code Format Diagram shows code No. 32.
If only code 12 is present (repeats more than 4 times in a row) then there are NO codes in memory.
To move to the next screen click on the Continue button
 Continue > 

Note on Example Model(s): Vauxhall-Opel Carlton, Corsa, Omega, Sintra
The example model(s) shown, Vauxhall-Opel Carlton, Corsa, Omega, Sintra for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.



< Back
All content copyright Rennacs Limited, 2009. All products names mentioned herein should be considered registered trademarks of their respective owners.
For comments and feedback please email comments@rennacs.com

Disclaimer