Auto Code Readers

Suzuki Airbags - Auto Repair Codes

Scan Tool for Codes and Live Data for your Suzuki Airbag (SRS) from $149.95

The information below may apply to Suzuki Vitara and many other models

Step 4
Suzuki SRS Code Reading
Connector Diagram
Connector Diagram
  • Connector is yellow in color and may have a rubber cap over the end.
Auto Repair Manual - How to read codes (No Special Tools Needed)
The SRS light will remain illuminated after 'prove out' if faults or stored fault codes are present.
1 Link terminals using your own jumper wire, (Click here for details) , as shown on the diagram.
2 Turn ignition ON.
3 The SRS light should start flashing.
4 Read codes as described in the Code Format Description below.
5 Press the continue button to enter the code numbers and get the code description.
Code Format Diagram
Code Format Description
Each code is made up of two series of flashes.
The first series indicates the 'tens' digit.
The second series indicates the 'ones' digit.
A long pause separates each code.
A shorter pause separates the 'tens' and 'ones'.
Code Format Diagram shows code No. 32.
If only code 12 is flashed out, then there are NO codes in memory.
To move to the next screen click on the Continue button
 Continue > 

Note on Example Model(s): Suzuki Vitara
The example model(s) shown, Suzuki Vitara for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.

< Back
All content copyright Rennacs Limited, 2009. All products names mentioned herein should be considered registered trademarks of their respective owners.
For comments and feedback please email