Auto Code Readers

Nissan ABS - Auto Repair Codes

Scan Tool for Codes and Live Data for your Nissan ABS from $149.95

The information below may apply to Nissan Primera, Serena and many other models

Step 4
Nissan ABS Code Reading
Connector Diagram
Connector Location
Auto Repair Manual - How to read codes (No Special Tools Needed)
1 Drive the vehicle at 30 kph or more for at least 1 minute.
2 Stop vehicle and turn ignition OFF.
3 Earth the terminal using a wire link, (Click here for details) , as shown on the diagram.
4 Turn ignition ON.
5 Read codes as described in the Code Format Description below.
6 Press the continue button to enter the code numbers and get the code description.
Code Format Diagrams
Code Format Description
There are two types of codes that could be observed. The most common is the Long flashes for 'tens'.
Each code is made up of two series of flashes.
The long flashes indicate the 'tens' digits.
The short flashes indicate the 'ones' digits.
A long pause separates each code sequence.
Once every code has been displayed the code sequence repeats.
If no faults, only code 12 will be displayed.
Upper Code Format Diagram shows code No. 12.
Each code is made up of two series of flashes.
The first series indicates the 'tens' digit.
The second series indicates the 'ones' digit.
A long pause separates each code.
A shorter pause separates the 'tens' and 'ones'.
Lower Code Format Diagram shows code No. 32.
To move to the next screen click on the Continue button
 Continue > 

Note on Example Model(s): Nissan Primera, Serena
The example model(s) shown, Nissan Primera, Serena for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.

< Back
All content copyright Rennacs Limited, 2009. All products names mentioned herein should be considered registered trademarks of their respective owners.
For comments and feedback please email