Auto Code Readers

Honda Airbags - Auto Repair Codes

Scan Tool for Codes and Live Data for your Honda Airbag (SRS) from $149.95

The information below may apply to Honda Ballade and many other models

Step 4
Honda SRS Code Reading
Connector Diagram
Connector Diagram
  • The connector is blue. Another connector (used for erasing codes) is exactly the same but yellow in color.
Auto Repair Manual - How to read codes (No Special Tools Needed)
PLEASE NOTE:If after following the instructions below the SRS Light does not flash, it either means there are no fault codes or there is a connection error. Check connection then recheck codes.

1 Ensure ignition is OFF for at least 10 seconds.
2 Link the terminals using your own wire link, (Click here for details) , as shown in the diagram.
3 Turn ignition ON. The SRS warning light should be flashing if codes are present.
4 Read codes as described in the Code Format Description below.
5 Press the continue button to enter the code numbers and get the code description.
Code Format Diagram
Code Format Description
Each following code is made up of two series of flashes.
The long flashes indicate the 'tens' digits.
The short flashes indicate the 'ones' digits.
A long pause separates each code sequence.
Once every code has been displayed the code sequence repeats.
No fault codes indicated by continuous short flashes.
Code Format Diagram shows code No. 12.
To move to the next screen click on the Continue button
 Continue > 

Note on Example Model(s): Honda Ballade
The example model(s) shown, Honda Ballade for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.

< Back
All content copyright Rennacs Limited, 2009. All products names mentioned herein should be considered registered trademarks of their respective owners.
For comments and feedback please email