Suzuki ABS - Auto Repair Codes

Scan Tool for Codes and Live Data for your Suzuki ABS from $199 USD

The information below may apply to Suzuki X-90 and many other models

Step 4

Suzuki ABS Code Reading

Connector Diagram

Auto Repair Manual - How to read codes (No Special Tools Needed)

Note:Vehicle may not flash any codes when hard faults present, i.e. may only display past or memory codes.

1 Drive the vehicle faster than 10kph for at least 1 minute.

2 Stop the vehicle and turn the ignition OFF.

3 Connect the terminals with your own wire link, (Click here for details) , as shown on the diagram.

4 Turn ignition ON, the ABS light will begin to flash.

5 Read codes as described in the Code Format Description below.

6 Press the continue button to enter the code numbers and get the code description.

Code Format Diagram

Code Format Description

• Each code is made up of two series of flashes.

• The first series indicates the 'tens' digit.

• The second series indicates the 'ones' digit.

• A long pause separates each code.

• A shorter pause separates the 'tens' and 'ones'.

• Each code repeats 3 times.

• Code Format Diagram shows code No. 32.

• The first code "flashed out" is always code 12.

• If Code 12 repeats at least 4 times in a row there are No Codes in memory.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Suzuki X-90
The example model(s) shown, Suzuki X-90 for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.