Rover ABS - Auto Repair Codes

Scan Tool for Codes and Live Data for your Rover ABS from $199 USD

The information below may apply to Rover and many other models

Step 4

Rover ABS Code Reading

Connector Diagram

Auto Repair Manual - How to read codes (No Special Tools Needed)

Note:Maximum of 3 trouble codes can be stored at one time. Each code repeats 3 times.

1 Drive the vehicle until it reaches operating temperature.

2 Stop vehicle, place it in part or neutral and turn ignition OFF.

3 Remove bridge pin from between terminals 2 and 4.

4 Connect the terminals using your own wire link, (Click here for details) , as shown in the diagram.

5 Turn on the ignition.

6 Codes will be emitted via ABS light on dashboard display.

7 Read codes as described in the Code Format Description below.

8 Press the continue button to enter the code numbers and get the code description(s).

Code Format Diagram

Code Format Description

• Each code is made up of two series of flashes.

• The first series indicates the 'tens' digit.

• The second series indicates the 'ones' digit.

• A long pause separates each code.

• A shorter pause separates the 'tens' and 'ones'.

• Code Format Diagram shows code No. 32.

• If only code 12 is flashed out, then there are NO codes in memory.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Rover
The example model(s) shown, Rover for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.