Nissan Automatic Transmission - Auto Repair Codes

Scan Tool for Codes and Live Data for your Nissan Transmission from $199 USD

The information below may apply to Nissan Gloria, Terrano and many other models

Step 4

Nissan Trans Code Reading

Connector Diagram

NO CONNECTOR IS USED FOR THIS METHOD

Auto Repair Manual - How to read codes (No Special Tools Needed)

1 Drive the vehicle until transmission reaches operating temperature.

2 With ignition ON and engine OFF place gear selector into D position.

3 Turn the power shift button to POWER.

4 Cycle the ignition switch OFF-ON.

5 Move the gear selector into position 2.

6 Turn the powershift button to AUTO.

7 Move the gear selector into position 1.

8 Turn the powershift button to POWER.

9 Depress the throttle pedal and release.

10 The Power Light on either the instrument cluster or the Power switch will begin flashing.

11 Read codes as described in the Code Format Description below.

12 Press the continue button to enter the code numbers and get the code description.

Code Format Diagram

Code Format Description

• The Code begins with a long start pulse.(St)

• 10 flashes follow, each flash represents a different fault code.

• A Short flash indicates no fault.

• A longer flash indicates a fault, where the code number is the position of the flash.

• Code Format Diagram shows fault codes2 and 6.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Nissan Gloria, Terrano
The example model(s) shown, Nissan Gloria, Terrano for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.