Auto Code Readers

Mitsubishi ABS - Auto Repair Codes

Scan Tool for Codes and Live Data for your Mitsubishi ABS from $699 USD

The information below may apply to Mitsubishi Eterna and many other models

Step 5
Mitsubishi ABS Code Reading
Connector Diagram
Not Applicable
Auto Repair Manual - How to read codes (No Special Tools Needed)
1 Drive the vehicle faster than 30 kph for at least 1 minute.
2 Stop vehicle and turn ignition OFF.
3 Depress brake pedal and hold.
4 Turn ignition to 'ON'
5 Pulse brake pedal 10 times at intervals of less than 1 second (very quickly).
6 The ABS light should begin to flash.
7 Read codes as described in the Code Format Description below.
8 Press the continue button to enter the code numbers and get the code description.
Code Format Diagram
Code Format Description
Each following code is made up of two series of flashes.
The long flashes indicate the 'tens' digits.
The short flashes indicate the 'ones' digits.
A long pause separates each code sequence.
Once every code has been displayed the code sequence repeats.
No fault codes indicated by continuous short flashes.
Code Format Diagram shows code No. 12.
To move to the next screen click on the Continue button
 Continue > 

Note on Example Model(s): Mitsubishi Eterna
The example model(s) shown, Mitsubishi Eterna for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.



< Back
All content copyright Rennacs Limited, 2009. All products names mentioned herein should be considered registered trademarks of their respective owners.
For comments and feedback please email comments@rennacs.com

Disclaimer