Landrover ABS - Auto Repair Codes

Scan Tool for Codes and Live Data for your Landrover ABS from $199 USD

The information below may apply to Landrover and many other models

Step 4

Landrover ABS Code Reading

Connector Diagram

Auto Repair Manual - How to read codes (No Special Tools Needed)

Note:only one code can be accessed at a time, clear the fault code to get the next one.

1 Drive the vehicle until it reaches operating temperature.

2 Stop vehicle, place it in part or neutral and turn ignition OFF.

3 Remove the relay for the ABS warning lamp.

4 Turn on the ignition, ABS warning lamp should illuminate.

5 Connect the terminals using your own wire link, (Click here for details) , as shown in the diagram.

6 Wait 5 seconds, ABS warning light should extinguish, then start code sequence.

7 Read codes as described in the Code Format Description below.

8 Press the continue button to enter the code numbers and get the code description(s).

Code Format Diagram

Code Format Description

• Each code is made up of two series of short flashes.

• The first series indicates the Major code group (from 1 to 6).

• The second series indicates the Minor code group (from 1 to 15)

• A long pause separates each repetition.

• A shorter pause separates the Major and Minor groups.

• Code sequence begins with a 2 short flashes (code 11).

• Code Format Diagram shows code No. 32.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Landrover
The example model(s) shown, Landrover for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.