Isuzu Automatic Transmission - Auto Repair Codes

Scan Tool for Codes and Live Data for your Isuzu Transmission from $199 USD

The information below may apply to Isuzu Irmscher and many other models

Step 4

Isuzu Transmission Code Reading

Connector Diagram

Auto Repair Manual - How to read codes (No Special Tools Needed)

1 Drive the vehicle until transmission reaches operating temperature.

2 Stop the vehicle, place in park, or neutral and turn ignition OFF.

3 Link terminals with your own wire link, (Click here for details) , as shown in the diagram.

4 Turn ignition ON. Read the codes on the flashing Transmission Light.

5 Read codes as described in the Code Format Description below.

6 Press the continue button to enter the code numbers and get the code description.

Code Format Diagram

Code Format Description

• Each code is made up of two series of flashes.

• The first series indicates the 'tens' digit.

• The second series indicates the 'ones' digit.

• A long pause separates each code.

• A shorter pause separates the 'tens' and 'ones'.

• Code Format Diagram shows code No. 32.

• If only code 12 is flashed out (more than 4 times in a row), then there are NO codes in memory.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Isuzu Irmscher
The example model(s) shown, Isuzu Irmscher for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.