Isuzu ABS - Auto Repair Codes

Scan Tool for Codes and Live Data for your Isuzu ABS from $199 USD

The information below may apply to Isuzu Axiom and many other models

Step 4

Isuzu ABS Code Reading

Connector Diagram

Auto Repair Manual - How to read codes (No Special Tools Needed)

1 Drive the vehicle faster than 30kph for at least 1 minute.

2 Stop vehicle and turn ignition OFF.

3 Ensure brake pedal is released. Connect the terminals with your own wire link, (Click here for details) , as shown on the diagram.

4 Turn ignition ON. Code transmission will begin a few seconds after the terminals have been connected.

5 Read codes as described in the Code Format Description below.

6 Press the continue button to enter the code numbers and get the code description.

Code Format Diagram

Code Format Description

• Each code is made up of two series of flashes.

• The first series indicates the 'tens' digit.

• The second series indicates the 'ones' digit.

• A long pause separates each code.

• A shorter pause separates the 'tens' and 'ones'.

• Each code is repeated three times, then the next code is displayed.

• Code Format Diagram shows code No. 32.

• The first code "flashed out" is always code 12.

• If Code 12 repeats at least 4 times in a row there are No Codes in memory.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Isuzu Axiom
The example model(s) shown, Isuzu Axiom for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.