Hyundai ABS - Auto Repair Codes

Scan Tool for Codes and Live Data for your Hyundai ABS from $199 USD

The information below may apply to Hyundai Lantra and many other models

Step 4

Hyundai ABS Code Reading

Connector Diagram

Note: You may need the Rennacs™ UniPlug and UniPlug specific software.
Click here for more info.

Auto Repair Manual - How to read codes (No Special Tools Needed)

Note:If the ABS warning light does not flash it means there are no fault codes.

1 Ground terminal 15 as shown in the diagram to your left.

2 Turn ignition ON, the ABS warning light should be flashing.

3 Read codes as described in the Code Format Description below.

4 Press the continue button to enter the code numbers and get the code description.

Tip:You may use pins 4 and 5 as ground for this connector.

Code Format Diagram

Code Format Description

• Code sequence begins with a 2 second flash.

• Each following code is made up of two series of flashes.

• The long flashes indicate the 'tens' digits.

• The short flashes indicate the 'ones' digits.

• A long pause separates each code sequence.

• Once every code has been displayed the code sequence repeats.

• Code Format Diagram shows code No. 12.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Hyundai Lantra
The example model(s) shown, Hyundai Lantra for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.