Honda Engines - Auto Repair Codes

Scan Tool for Codes and Live Data for your Honda Engine from $199 USD

The information below may apply to Honda Breeze, Domani and many other models

Step 4

Honda EFI Code Reading

Connector Diagram

Tips:
• Connector is likely to be blue in colour. The connector may need to be unplugged from socket.

Auto Repair Manual - How to read codes (No Special Tools Needed)

PLEASE NOTE:If after following the instructions below the Check Engine Light does not flash it either means there are no fault codes or there is a connection error. To test connection, remove the TPS and run the engine then recheck codes.

1 If possible run the engine to bring the oxygen sensor up to operating temperature then switch the engine off.

2 Connect the terminals using your own jumper wire, (Click here for details) , as shown in the diagram to your left.

3 Turn ignition ON.

4 If the Check Engine Light (CEL) flashes, read codes as described in the Code Format Description below.

5 Press the continue button to enter the code numbers and get the code description(s).

Code Format Diagram

Code Format Description

• Each code is made up of two series of flashes.

• The long flashes indicate the 'tens' digits.

• The short flashes indicate the 'ones' digits.

• A long pause separates each code sequence.

• Code Format Diagram shows code No. 12.

• If nolongflashes are observed then the code is a straight count of short flashes. i.e. 4 flashes = code 4.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Honda Breeze, Domani
The example model(s) shown, Honda Breeze, Domani for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.