Honda ABS - Auto Repair Codes

Scan Tool for Codes and Live Data for your Honda ABS from $199 USD

The information below may apply to Honda Prelude and many other models

Step 5

Honda ABS Code Reading

Connector Diagram

Auto Repair Manual - How to read codes (No Special Tools Needed)

Note:It could take up to 10 seconds from step 3 before the LED begins to flash. If after following the instructions below the LED does not flash it either means there are no fault codes.

1 Drive the vehicle faster than 30kph for at least 1 minute.

2 Stop vehicle and turn ignition OFF.

3 Turn ignition ON, LED in ABS computer will be on or flashing only if codes are present.

4 Read codes as described in the Code Format Description below.

5 Press the continue button to enter the code numbers and get the code description.

Code Format Diagram

Code Format Descripiton

• Code sequence begins with a 1 second flash.

• Each code is made up of two series of short flashes.

• The first series indicates the 'tens' digit.

• The second series indicates the 'ones' digit.

• A long pause separates each code.

• A shorter pause separates the 'tens' and 'ones'.

• Each code only gets displayed once, to replay codes turn ignition OFF and ON.

• Code Format Diagram shows code No. 32.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Honda Prelude
The example model(s) shown, Honda Prelude for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.