Holden Gearbox - Auto Repair Codes

Scan Tool for Codes and Live Data for your Holden Transmission from $199 USD

The information below may apply to Holden and many other models

Step 4

Holden Trans Code Reading

Connector Diagram

Auto Repair Manual - How to read codes (No Special Tools Needed)

1 Drive the vehicle until transmission reaches operating temperature.

2 Stop the vehicle, place in park, or neutral and turn ignition OFF.

3 Link terminals with your own wire link, (Click here for details) , as shown in the diagram.

4 Turn ignition ON. Codes should now be flashed on a transmission light.

5 Read codes as described in the Code Format Description below.

6 Press the continue button to enter the code numbers and get the code description.

Code Format Diagram

Code Format Description

• Each code is made up of two series of flashes.

• The first series indicates the 'tens' digit.

• The second series indicates the 'ones' digit.

• A long pause separates each code.

• A shorter pause separates the 'tens' and 'ones'.

• No fault codes is indicated by very short repeating flashes.

• Code Format Diagram shows code No. 32.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Holden
The example model(s) shown, Holden for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.