Holden EFI - Auto Repair Codes

Scan Tool for Codes and Live Data for your Holden Engine from $199 USD

The information below may apply to Holden Barina, Camira and many other models

Step 4

Holden EFI Code Reading

Connector Diagram

Auto Repair Manual - How to read codes (No Special Tools Needed)

1 If possible run the engine to bring the oxygen sensor up to operating temperature then switch the engine off.

2 Connect the terminals using your own jumper wire, (Click here for details) , as shown in the diagram to your left.

3 Turn ignition ON, the Check Engine Light (CEL) should begin flashing.

4 Read codes as described in the Code Format Description below

5 Press the continue button to enter the code numbers and get the code description(s).

Code Format Diagram

Code Format Description

• Each code is made up of two series of flashes.

• The first series indicates the 'tens' digit.

• The second series indicates the 'ones' digit.

• A long pause separates each code.

• A shorter pause separates the 'tens' and 'ones'.

• Code sequence starts with code 12 and repeats each code 3 times. (if only code 12 is found, system is normal)

• Code Format Diagram shows code No. 32.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Holden Barina, Camira
The example model(s) shown, Holden Barina, Camira for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.