Holden Brakes - Auto Repair Codes

Scan Tool for Codes and Live Data for your Holden ABS from $199 USD

The information below may apply to Holden Barina and many other models

Step 4

Holden ABS Code Reading

Connector Diagram

Auto Repair Manual - How to read codes (No Special Tools Needed)

1 Drive the vehicle faster than 30 kph for at least 1 minute.

2 Stop vehicle and turn ignition OFF.

3 Connect pins 5 & 12 of the diagnostic connector with your own wire link, (Click here for details) .

4 Turn the ignition ON, the ABS light on the dash should start flashing.

5 Read codes as described in the Code Format Description below.

6 Press the continue button to enter the code numbers and get the code description.

Code Format Diagram

Auto Repair Manual - How to read codes (No Special Tools Needed)

• Each code is made up of two series of flashes.

• The first series indicates the 'tens' digit.

• The second series indicates the 'ones' digit.

• A long pause separates each code.

• A shorter pause separates the 'tens' and 'ones'.

• A system pass code is indicated by very short repeating flashes.

• Code Format Diagram shows code No. 32.

• If only code 12 is flashed out, then there are NO codes in memory.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Holden Barina
The example model(s) shown, Holden Barina for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.