Daihatsu Airbags - Auto Repair Codes

Scan Tool for Codes and Live Data for your Daihatsu Airbag (SRS) from $199 USD

The information below may apply to Daihatsu Handi and many other models

Step 4

Daihatsu SRS Code Reading

Connector Diagram

Note: You may need the Rennacs™ UniPlug and UniPlug specific software.
Click here for more info.

Auto Repair Manual - How to read codes (No Special Tools Needed)

1 Drive the vehicle faster than 30kph for at least 1 minute.

2 Stop the vehicle and turn the ignition OFF.

3 Connect terminal 4 and 13 with your own wire link, (Click here for details) , as shown on the diagram.

4 Turn ignition ON, the Airbag warning light will begin to flash.

5 Read codes as described in the Code Format Description below.

6 Press the continue button to enter the code numbers and get the code description.

Code Format Diagram

Code Format Description

• Each code is made up of two series of flashes.

• The first series indicates the 'tens' digit.

• The second series indicates the 'ones' digit.

• A long pause separates each code.

• A shorter pause separates the 'tens' and 'ones'.

• Code Format Diagram shows code No. 32.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Daihatsu Handi
The example model(s) shown, Daihatsu Handi for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.