Chrysler Automatic - Auto Repair Codes

Scan Tool for Codes and Live Data for your Chrysler Transmission from $199 USD

The information below may apply to Chrysler Eagle Talon (Pre 96) and many other models

Step 5

Chrysler Trans Code Reading

Connector Diagram

Auto Repair Manual - How to read codes (No Special Tools Needed)

1 If possible run the engine, to bring it and the oxygen sensor up to operating temperature, then switch the engine OFF.

2 Connect an LED tester or Voltmeter, (Click here for details) to points labelled A and B on the diagram

3 Turn the ignition ON.

4 Codes will be emitted via the LED tester or Voltmeter.

5 Read codes as described in the Code Format Description below.

6 Press the continue button to enter the code numbers and get the code description(s).

Code Format Diagram

Code Format Description

• Each code is made up of two series of flashes.

• The long flashes indicate the 'tens' digits.

• The short flashes indicate the 'ones' digits.

• A long pause separates each code sequence.

• Code Format Diagram shows code No. 12.

• If nolongflashes are observed then the code is a straight count of short flashes. i.e. 4 flashes = code 4.

• Short continuous repeating pulses means there are no fault codes present.

To move to the next screen click on the Continue button

 Continue > 

Note on Example Model(s): Chrysler Eagle Talon (Pre 96)
The example model(s) shown, Chrysler Eagle Talon (Pre 96) for this auto repair service are only an indication to help you. There may be many other models that apply to this connector. Click above link to see the complete vehicle coverage list.