Auto Code Readers

Navigation: Home -> Find Diagnostic Connector

Toyota Engines Diagnostic Connectors

Scan Tool for Codes and Live Data for your Toyota Engine from $699 USD

Toyota Engines - Please select the connector for your vehicle from the options below.

 
Toyota Engines Connector 21

Photos of where to find connector in car

Diagnostic Link Connector No. 21

Year range: 1996 to 2009

Locations: Under the drivers side dash panel.

(Toyota EFI) Use This Connector >
Toyota Engines Connector 18

Photos of where to find connector in car

Diagnostic Link Connector No. 18

Year range: 1990 to 2000

Locations: Near the left hand strut tower.
Near the right hand strut tower.

Step 4
Toyota EFI Code Reading
Connector Diagram
Connector Location
Instructions
Please Note:
  • The Toyota test mode is a 'more sensitive' mode entered by connecting terminals TE2 and E1. If TE2 is not in the diagnostic connector there is no test mode.
Test Mode
  • For Toyota Test Mode select 'Test Mode'
Normal Mode
  • For all other petrol Toyota's select 'Normal Mode'
Toyota Engines Connector 17

Diagnostic Link Connector No. 17

Year range: 1984 to 1988

Locations: Under the drivers side dash panel.

(Toyota EFI) Use This Connector >
Toyota Engines Connector 16

Diagnostic Link Connector No. 16

Year range: 1988 to 1996

Locations: Near the left hand strut tower.
Near the right hand strut tower.
Next to the airflow meter or battery.

Step 5
Toyota EFI Code Reading
Connector Diagram
Connector Location
Instructions
Please Note:
  • The Toyota test mode is a 'more sensitive' mode entered by connecting terminals TE2 and E1. If TE2 is not in the diagnostic connector there is no test mode.
Test Mode
  • For Toyota Test Mode select 'Test Mode'
Normal Mode
  • For all other petrol Toyota's select 'Normal Mode'
Toyota Engines Connector 12

Photos of where to find connector in car

Diagnostic Link Connector No. 12

Year range: 1986 to 1993

Locations: Near the left hand strut tower.
Near the right hand strut tower.

Step 4
Toyota EFI Code Reading
Connector Diagram
Connector Location
Instructions
Please Note:
  • The Toyota test mode is a 'more sensitive' mode entered by connecting terminals TE2 and E1. If TE2 is not in the diagnostic connector there is no test mode.
  • TE2 will be labelled under cap if pertinent.
Test Mode
  • For Toyota Test Mode select 'Test Mode'
Normal Mode
  • For all other petrol Toyota's select 'Normal Mode'
Toyota Engines: For a vehicle coverage list Click Here


< Back
All content copyright Rennacs Limited, 2009. All products names mentioned herein should be considered registered trademarks of their respective owners.
For comments and feedback please email comments@rennacs.com

Disclaimer