Auto Code Readers

Flashing CEL

Navigation: Home -> Find Diagnostic Connector

Subaru Engines Diagnostic Connectors

Scan Tool for Codes and Live Data for your Subaru Engine from $699 USD

Subaru Engines - Please select the connector for your vehicle from the options below.

 
OBD2 / EOBD connector

This is an OBD2 / EOBD standard 16 pin data link connector

To get a list of codes that relate to this system click here

This connector is usually located under the driver side dash panel.

Subaru Engines Connector 1

Photos of where to find connector in car

Diagnostic Link Connector No. 1

Year range: 1984 to 2009

Locations: Beside (or taped to) the steering column.

Step 4
Subaru EFI Code Reading
Connector Diagram
Connector Location
Tips
  • Connectors are a matching male and female pair. Each vehicle has two connector pairs.
  • One connector pair are green, the other pair are EITHER black or clear.
Instructions
All Subaru's have the ability to read two types of codes, Memory and Present.
NOTE: Memory codes should be read first.
Memory
  • Memory codes are those that have been detected previously and stored.
  • Connect either Black or Clear connectors together for this test.
 Memory 
Present
  • Present codes are those that are existing at the current time.
  • Connect GREEN connectors together for this test.
Subaru Engines: For a vehicle coverage list Click Here


< Back
All content copyright Rennacs Limited, 2009. All products names mentioned herein should be considered registered trademarks of their respective owners.
For comments and feedback please email comments@rennacs.com

Disclaimer