|
|
|
Connector Diagram Note: You may need the Rennacs™ UniPlug and UniPlug specific software. Click here for more info. Instructions Please Note: - There are three methods of putting vehicles with this connector into diagnostic mode.
- If one does not work, try the others.
- Select one of the methods below.
Connector Method - This is the prefered method.
- To select this method click 'Connector Method'.
Accelerator Pedal Method - Does not require a connector.
- To select this method click 'Pedal Method'.
Engine Control Unit (ECU) • If you can find an ECU with an LED on it, click 'ECU'. |
|
|
|
|
|
| | Diagnostic Link Connector No. 25
Year range: 1989 to 1992
Locations: In the center console.
|
|
| (Nissan EFI) Use This Connector > |
|
|
|
|
|
| (Nissan EFI) Use This Connector > |
|
|
|
|
Photos of where to find connector in car
| | Diagnostic Link Connector No. 3
Year range: 1986 to 2003
Locations: Under the drivers seat.
Under the passengers seat.
Above the passengers side kick panel.
In the center console.
|
|
Instructions Please Note: - The EFI computer will either have One or Two LEDs as depicted in the diagram.
- Choose below depending on the number of LEDs.
One LED - If only one LED select 'One LED'.
Two LEDs - If there are Two LEDs select 'Two LEDs'.
|
|
|
|
|
